Belkin f5d7230-4 - Manual (Page 40)

38
Alternate Setup Method
38
Setting your Connection Type if you are a Telstra
®
BigPond User
[Australia Only]. Your user name and password are provided to you by
Telstra BigPond. Enter this information below. Choosing your state from
the drop-down menu
(6)
will automatically fill in your login server IP
address. If your login server address is different than the one provided
here, you may manually enter the login server IP address by placing a
check in the box next to “User decide login server manually”
(4)
and
type in the address next to “Login Server”
(5)
. When you have entered
all of your information, click “Apply Changes”
(7)
. After you apply the
changes, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
(7)
(6)
1. Select your State
Select your state from the drop-down menu
(6)
. The “Login Server”
box will automatically be filled in with an IP address. If for some
reason this address does not match the address that Telstra has
given, you can manually enter the login server address. See “User
decide login server manually”
(4)
.
2. User Name
Provided by your ISP. Type in your user name here.
3. Password
Type in your password and retype it into the “Retype Password”
box to confirm it.