Philips Téléviseur écran plat numérique à écran large - Manual (Page 7)

5
The first time the TV set is switched on, a
congratulation message will appear on screen.
The language of which changes every 5 seconds.
If the menu is not displayed, press and hold down
the MENU key on the side of the TV set for
5 seconds to display the menu.
& Press the
OK
key on the remote control, the
moment your prefered language is visible
on the screen.The Setup menu is displayed :
é The language, corresponding country and time
zone is now preselected according to the opening
screen. However, you can still change your
preferences before you start a service scan.
é The language, corresponding country and time
zone is now preselected according to the
opening screen. However, you can still change your
preferences before you start a service scan.
“ With the cursor keys, select language, country
or Time zone and check if the adjustment is
according to your preferences. If necessary, use the
cursor keys to make your adjustment and press
OK
to exit.
CAUTION : if you select a wrong country, the channel
numbering will not be according to the standard for
your country.
‘ Select service scan from the menu and press OK
to start the installation. The service scan menu is
displayed. All the digital and analogue programmes
are searched for and stored automatically. When
the search is complete, the menu will indicate
the number of digital services and analogues
programmes found.
( Press the
OK
key twice to start watching TV.
The television then displays the current
programme. The installation is now complete.
When you select a digital programme, an
information banner is displayed for a few
seconds at the top of the screen.
You can also use the
key of the remote control
to display this banner.A second press displays more
information about the programme (when available).
Banner description
Switch on for the first time
The banner contains information on the
preset number, channel name, programme
duration, transmission clock, programme title
and the time remaining of the current
programme.
Symbols description :
i
more information about this programme is
available : press the
key to display or remove it.
i subtitling is available : if you want to display
them, press the i key or the OPTIONS key to
access the options menu and select subtitles.
4 other audio languages are availables and can be
selected in the options menu.
s the selected Favourite list is displayed in the
one of the colour (red, green, yellow or blue) of
the activated list.
Note : A white colour
s will appear if the
programme is stored in one or more of the favourite
list which is currently not activated.
NOTE : If at some point of time you decide to
reset to the factory default settings, press and hold
down the MENU key on the side of the TV set
for 5 seconds. A congratulation message will
appear on screen. Repeat steps 1 - 5 as if this
was the first time you have turned on the TV.
Understanding the information in the banner