Philips Téléviseur écran plat numérique à écran large - Manual (Page 6)

4
Installing your television set
& Positioning the television set
Place your TV on a solid stable surface. To avoid
danger, do not expose the TV to water or a heat
source (e.g. lamp, candle, radiator). Do not
obstruct the ventilation grid at the rear
é Connecting the aerials
• Use the aerial connection lead supplied and
connect the ¬ socket situated at the bottom of
the TV to your aerial socket.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240V/50 Hz).
For connecting other appliances, see pagess 18-19.
“ Switching on
To switch on the set, press the POWER key. A
green indicator comes on and the screen lights
up. Go straight to the chapter “Switching on for
the first time on page 5. If the television remains
in standby mode, press the P(age) + key on the
remote control.
The indicator will flash when you use the remote
control.
standby
fast rewind
fast forward
recording
pause
stop
play
tv menu
cancel
OK validation
navigation and adjustments
digit keys
programme selection
audio selection
OSD menu
Press the (SELECT) key to select the required mode : DVD or AUX (amplifier). The remote
control indicator lights up to display the selected mode. It switches off
automatically after 20 seconds if left idle. The remote control automatically returns to TV
mode.
The following keys are operational depending on the equipment :
Mode selector