Philips Téléviseur écran plat numérique à écran large - Manual (Page 14)

12
This menu allows you to automatically search for all
the analogue programmes available in your region.
& From the analogue mode, press the
(TV menu) key to display the main menu.
é With Cursor (œ É ) keys to select Install and
then Auto Store. Press É and the search begins.
After several minutes, the Install menu reappears
automatically.
“ If the transmitter or the cable network broadcasts
the automatic sort signal, the programmes will be
correctly numbered.
‘ If this is not the case, the programme will be
numbered in descending order strating at 99, 98,
97, etc
Use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc). Where this
is the case, make your choice using the o œ keys and
confirm with the É key.
To exit or interrupt the search, press the key.
If no picture is found, refer to the chapter entitled Tips
on p.20
( To exit from the menu, press key.
Manual tuning of analogue programmes
This menu is used to store the programmes one
at a time.
& Press the
(TV menu) key.
é With Cursor (œ É ) keys to select Install and
then Manual Store.
“ System : select Europe (automatic detection*)
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom
(I standard) or France (LL’ standard),
* Except for France (LL’ standard) : in this case,
select the option FRANCE.
‘ Search : press É key. The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered directly
using the
keys.
If no programme is found, refer to the Tips chapter on
page 20.
( Program No : enter the required number with
the ÑÉ or (0 to 9) keys.
§ Fine Tune : if the reception is not satisfactory,
adjust using the ÑÉ keys.
è Store : press É key. The programme is stored.
! Repeat steps ‘ to è for each programme to
store.
ç To quit the menu, press key.
TV Menu
Picture
Sound
Features
Install
Auto Store
Program É 8
TV É 196 MHz
Automatic tuning of analogue programmes
TV Menu
Picture
Sound
Features
Install
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe
Program sort
& Press the key.The TV Menu is displayed on
the screen.
é With the cursor, select the Install menu followed
by the Sort menu.
“ Select the programme you want to move using
the o œ keys and press É.
‘ Then use the o œ keys to select the new number
and validate with Ñ.
( Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press .
TV Menu
Picture
Sound
Features
Install