Philips Téléviseur écran plat numérique à écran large - Manual (Page 10)

8
Language and location preferences
This menu allows you to select your preferred
language for audio, subtitle, teletext and menu
and make changes to the location (country
and time zone).
& From the digital mode, press the key
to display the setup menu.
é Use the œ key to select preferences and
press É.
“ Select Languages, Location or Digital Audio
Output (œ) and press É.
‘ Use the o œ keys to select a setting and
press É to enter into the sub-menu. Make
your adjustment and press
OK
or p to exit.
Language default settings
• Audio : to select the audio sound language.
• Subtitle/Teletext : to select the
subtitle/teletext language.
• Subtitling mode : off, on or auto (subtitle only
displayed in case of original audio transmission).
• Subtitles for hearing impaired : to activate or
deactivate the specific subtitle for hearing
impaired (if made available by the broadcaster).
• System : to select the menu language.
Location settings
• Country : to select the country where you are
located.
• Time zone : to select the time zone where
you are located.
Digital Audio Output settings
To select AC3 (if the amplifier supports the
Dolby Digital format) or PCM (if it doesn’t
support Dolby Digital format).
( Press the key to leave the menu.
This menu allows you to setup the access
restrictions of the digital channels.
& From the digital mode, press the key
to display the setup menu.
é Use the œ key to select Access restriction
and press É.
“ Press the É key to enter into the Set pin
code protection menu.
‘ Use the ÑÉ keys to set to on and press
OK
to exit.You can then access the other
adjustments :
Warning : the moment you use any kind of access
restriction, you need to fill in the pin code when you
schedule a program for recording.
• Maturity rating : select your preferred rating to
lock the channel.
Maturity rating will only block certain programmes if
the broadcaster provides data with the programme.
• TV channels : select the TV channel you want
to lock and press
OK
.
• Radio station : select the radio station you
want to lock and press
OK
.
• Change pin code : press É to enter in the
menu. Follow the on-screen instruction to
change your access code.
The default pin code is 1234. If you have forgotten
your personal code, you can reset to the default pin
code (1234) by enter the universal code 0711.
( Press the key to leave the menu.
The TV is equipped with a Common Interface (CI)
slot (see p.19). A CI module can enable additional
services, for example Pay TV. The Access Restrictions
menu will show the CI Access Restrictions when a CI
module is installed. The CI module is responsible for the
messages and texts on screen. In case of failure or
strange behaviour, you must call your CI service provider.
Close
Access restrictions