Brother FAX-1940CN - Manual (Page 100)

MESSAGE CENTER (FAX-1940CN ONLY) 7 - 2
Recording Message Center Outgoing Message
Recording the Message Center Outgoing Message ( Msg Ctr OGM )
is the first step you need to follow before you can turn on the
Message Center. Make sure your OGM is less than 20 seconds long.
1
Press Menu/Set , 2 , 7 , 1 .
The LCD prompts you to choose an
OGM.
2
Press ▲ or ▼ to select
Msg Ctr OGM (not F/T OGM ).
Press Menu/Set .
3
Press ▲ or ▼ to select Record OGM .
Press Menu/Set .
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a
fax, please press
5 1 , wait for fax tones, then press the Start
button.
5
Replace the handset.
The Message Center will play your OGM.
6
Press Stop/Exit .
This is the only setting you can select if you want to turn on
the Message Center.
1.OGM
Msg Ctr OGM