Brady 2034 - Manual (Page 43)

_______________________________________________________________________
Using Your Printer
37
Temp
−
this reading is the feedback voltage of the printhead thermistor. At
power up or in an idle condition, this value should be in the range of 060 to
065. A reading of 175 is high and could
decrease the life of the printhead. An average amount of printing will give
readings that range from 070 to 120.
Pot
−
this reading comes from the darkness potentiometer located on the
front panel board. It will vary from 000 (darkest) to 255 (lightest). Adjust
this value for a midrange value of 128.
TOFA
−
(Top of Form Adjustment) determines where the first position of
print begins on the label.
RIBN
−
this value indicates the operation of the ribbon mechanism, this
value will vary.
RWND
−
this value indicates the operation of the internal rewind
mechanism, this value will vary.
Counter Information
−
is the values and dates of the absolute and
resettable counters.
Memory Configuration
−
lists the current size of the 'Internal Module'
RAM in 4K byte blocks, and the 'Scalable Fonts' current cache setup for
scalable font calculations.