Brady 2034 - Manual (Page 36)

_______________________________________________________________________
30
Using Your Printer
BASIC FUNCTION
INTERNAL BATCH
• Allows internal label creation with Internal Batch
Cartridge
ENABLE
DISABLE*
BASIC FUNCTION
CONVERSION
• Used to set the Printer's system of measurement
METRIC
DECIMAL*
• Printer interprets all measurements as metric values
• Printer interprets all measurements as decimal values
BASIC FUNCTION
TOF ADJUST
• Selects the point where the label's edge is detected by
the sensor
• Set start of print from the label's edge. 128 sets the
start
of print approximately .3 inches, (7.6 mm) from the
label's edge
Advanced Setup
ADVANCED SETUP
COUNTERS
ABSOLUTE VALS.
RESETTABLE VALS.
RESET COUNTERS
• Non-resettable counter (viewed only)
• User resettable counter (can keep track of labels)
• Resettable values re-start at 0
ADVANCED SETUP
DATE/TIME
• Allows current date and time to be set
SET DAY NAME day
hh:mm a dd mon yr
ADVANCED SETUP
LABEL OPTIONS
HEAT SETTING • Values: 00 to 30, (*10) (0 = lightest, 30 =darkest)
PRINT SPEED • Values: 2ips to 10ips, (*6) (Print speed/ inches per
sec)
SLEW SPEED • Values: 2ips to 10ips, (*7) (Label feed rate/ inches
per
sec.
BACKFEED SPEED • Values: 2ips to 5ips, (*3.5), (rate the printer backs up
label
ROW ADJUST • Vertical position where printing begins, (*0) (shifts
up)
COLUMN ADJUST • Values 0 to 410, (0*)
CONT. LABEL LEN • Values 0000 to 9999, (*0) (00.00 to 99.99")
(label page length)
* represents default setting