Barco NIO E-2620 - Manual (Page 63)

Barco Display Tab
Nio® medical display systems 63
Barco Display Tab
Introduction
The Barco Display Tab is used for gathering information about the
BarcoMed Flat Panel Display(s).
To access the Barco Display Tab do the following:
1. Open the “Display Properties Control Panel” by right clicking
on the desktop, then select “Properties”.
2. Under Windows 2000 and Windows XP, click on the
“Settings” tab. Double click on the rectangle that
represents the BarcoMed Display you are working with to
bring up its properties page. Click on the “BARCO Display”
tab (figure 34 below).
Figure 34: BARCO Display Tab under Windows 2000 and
Windows XP