Network difficulties – Brother DCP-193C User Manual
Page 71
Troubleshooting and Routine Maintenance
63
B
Network Difficulties
Difficulty
Suggestions
Cannot print over the Network.
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (see Printing Reports on page 20.) and check
the current Network settings printed in this list. Reconnect the LAN cable to the
hub to verify that the cabling and network connections are good. If possible, try
connecting the machine to a different port on your hub using a different cable. If
the connections are good, the machine shows LAN Active for 2 seconds.
(If you are having Network problems, see the Network User’s Guide for more
information.)
The network scanning feature does
not work.
(Windows
®
users only) Firewall settings on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using personal Firewall software, see the User’s Guide for your
software or contact the software manufacturer.
For Windows
®
XP SP2 and Windows Vista
®
users, see Firewall settings in the
Software User’s Guide on the CD-ROM.
For Windows
®
XP SP1 users, please visit the Brother Solutions Center.
Your computer cannot find your
machine.
® users> Firewall settings on your PC may be rejecting the necessary network connection. Re-select your machine in the Device Selector application located in
For detail, see the instruction above.
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
model list in ControlCenter2.