Brother DCP-193C - Manual (Page 33)

Making copies
25
4
Making N in 1 copies or a
poster (Page Layout)
4
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster.
IMPORTANT
• Make sure paper size is set to Letter or
A4.
• You cannot use the Enlarge/Reduce
settings with the N in 1 and Poster
features.
• N in 1 colour copies are not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
a
Load your document.
b
Enter the number of copies you want.
c
Press Copy Options and a or b to
choose Page Layout.
Press OK.
d
Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L), Poster(3 x 3)or
Off(1 in 1).
Press OK.
e
Press Mono Start to scan the
document. You can also press
Colour Start if you are using the Poster
layout.
f
After the machine scans the page, press
a
(Yes) to scan the next page.
Next Page?
a Yes b No
g
Place the next page on the scanner
glass. Press OK.
Set Next Page
Then Press OK
h
Repeat steps f and g for each page of
the layout.
i
After all the pages have been scanned,
press b (No) to finish.
Note
If glossy paper is selected as the paper
type setting for N in 1 copies, the images
will be printed as if plain paper had been
selected.
Press
and then a or b to
choose
Page Layout
Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)