Brother CS-8150 - Manual (Page 51)

Replacing the Presser Foot 45
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
3
Raise the presser foot lever.
1 Presser foot lever
X The presser foot is raised.
4
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
1 Presser foot holder screw
5
Attach the presser foot holder.
• For details, refer to “Removing the presser
foot holder” (page 43).
Memo
● Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to “Stitch Settings” (page 118).
1
1
S3_brotherE.book Page 45 Thursday, May 15, 2003 1:58 PM