Brother CS-8150 - Manual (Page 39)

Upper Threading 33
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
5
Insert the thread cartridge (with the extra
spool pin attached) into the thread cassette
compartment.
• For more details, refer to step
5
in “Using
the extra spool pin” (page 30).
X Pass both threads through the needle bar
thread hook.
• The needle threader cannot be used. If the
needle threader is used with the twin needle,
the sewing machine may be damaged.
6
Install the twin needle.
• For details, refer to “Replacing the needle”
(page 36).
7
Manually thread the left needle with the
thread for the left side of the stitch.
• For details, refer to “Thread the needle
manually” (page 31).
8
Remove the thread for the right side of the
stitch from the needle bar thread hook, and
then use it to thread the right needle.
9
Attach zigzag foot “J”.
• For details on changing the presser foot, refer
to “Replacing the presser foot” (page 41).
0
Turn on the sewing machine.
X The LCD comes on.
a
Press (settings key) in the operation panel.
X The settings screen appears.
b
Press , , and (arrow keys) until
is selected.
● When using the twin needle, be sure to
attach zigzag foot “J”, otherwise the
needle may break or the machine may be
damaged.
CAUTION
S3_brotherE.book Page 33 Thursday, May 15, 2003 1:58 PM