Caution – Brother CS-8150 User Manual
Page 40
GETTING READY ————————————————————————————————————————————————————————
34
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
c
Press
(OK
key).
X
The screen for selecting the twin needle
appears.
d
Press
to
select .
To return to
, press
.
X
The twin needle can now be used.
e
Press
(OK key).
X
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
Note
● Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
f
Select a stitch.
• For details on selecting a stitch, refer to
“Selecting stitching” (page 66).
• For details on the stitches that can be sewn
with the twin needle, refer to “Stitch
Settings” (page 118).
g
Start sewing.
• For details on starting to sew, refer to
X
Two lines of stitching are sewn parallel to
each other.
Note
● When changing the sewing direction, press
(needle position button) to raise the
needle from the fabric, and then raise the
presser foot lever and turn the fabric.
●
When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine
may be damaged.
●
When using the twin needle, be sure to
select an appropriate stitch, otherwise
the needle may break or the machine
may be damaged.
CAUTION
CAUTION
●
Do not try turning the fabric with the
twin needle left in the fabric, otherwise
the needle may break or the machine
may be damaged.
CAUTION
S3_brotherE.book Page 34 Thursday, May 15, 2003 1:58 PM