Brother CS-8150 - Manual (Page 21)

Changing the Machine Settings 15
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
■ List of stitch or machine attributes
The stitch or machine attributes that can be set are listed below. For details on each attribute, refer to the
corresponding reference page.
Attribute Icon Details Reference
Automatic
reverse/
reinforcement
stitching
Specifies automatic reverse/reinforcement stitching. page 59
Check
pattern
Allows combined patterns to be checked. page 109
Left/right
mirror
imaging
Mirror images patterns along a vertical axis. page 112
Pattern
length
Adjusts the length of satin stitches. page 111
Repeated/
single sewing
Specifies whether the pattern will be sewn once or
repeatedly.
page 110
Needle
position
Specifies where the needle is positioned when the
sewing machine is stopped.
page 16
Twin needle
sewing
Specifies the twin needle. page 32
Stitch width
control
Allows the stitch width to be adjusted with the
sewing speed controller.
page 94
Language
Allows the language used in the screens to be
changed.
page 17
Buzzer
Specifies whether or not a beep is sounded with
each operation.
page 130
LCD
brightness
Adjusts the brightness of the LCD. page 16
Vertical
pattern
adjustment
Adjusts the up and down position of the pattern. page 114
S3_brotherE.book Page 15 Thursday, May 15, 2003 1:58 PM