Brother FAX-2480C - Manual (Page 73)

Message Center (FAX-2580C only)
57
9
Listening to your OGM
9
a
Press Menu, 2, 7, 1.
b
Press a or b to choose Msg Ctr OGM.
Press OK.
c
Press a or b to choose Play OGM.
Press OK.
d
Press Stop/Exit.
Erasing your OGM
9
a
Press Menu, 2, 7, 1.
b
Press a or b to choose Msg Ctr OGM
or F/T OGM, then press OK.
c
Press a or b to choose Erase OGM.
Press OK.
d
Do one of the following:
„ Press 1 to erase the OGM.
„ Press 2 to exit without erasing.
e
Press Stop/Exit.
Fax/Tel OGM
(Announcement)
9
If your machine is set to Fax/Tel receive
mode, this message will be played by your
Brother machine to a caller. Unlike the
Msg Ctr OGM, the caller will not be able to
leave a message.
To record your Fax/Tel OGM, follow the
instructions on page 56 and choose F/T OGM
(not Msg Ctr OGM). If you need to review the
steps for setting up the Fax/Tel receive mode,
see Receive modes on page 35.
Activating Message Center
memory
9
When the light glows, Message Center
mode is active. Press to enter MC:Msg
Ctr mode.
MC:Msg Ctr