beautypg.com

2 return to standby mode – Barco R9001870 User Manual

Page 26

background image

5. Direct source selection

5.2 Return to standby mode

How to return to standby remotely

1. Point the Remote Control to the front of the Cine VERSUM Master or the Cine VERSUM 80.

2. Press the standby button on the Remote Control again. (image 5-2)

The Cine VERSUM Master switches to the standby mode and switches on its turn the connected display into the standby mode.

When switching the Cine VERSUM 80 into the standby mode, a cool down period for the lamp of about 1
minute is activated. As a result, restarting of the lamp is not possible during the cool down period. This mode
is indicated by the standby LED which blinks at a beat of 0.3 on/0.3 off

22

R5976490 CINE VERSUM SYSTEM 17012003

See also other documents in the category Barco Projectors: