Overview user's controls, 1 cine versum master, 2 cine versum 80 – Barco R9001870 User Manual
Page 11: Overview user’s controls, 7 3.2 cine versum 80
3. OVERVIEW USER’s CONTROLS
3. OVERVIEW USER’S CONTROLS
Overview
•
•
•
•
•
3.1 Cine VERSUM Master
Front View
The front side of theCine VERSUM Master is provided with the following controls:
Image 3-1
Front side Cine VERSUM Master
Controls function description
Ref.
Function
Description
1
Infra Red Reception LED indicator
Lights up when a valid Infra Red signal from the Remote Control has
been captured.
2
Infra Red Receiver
Reception diode for the Infra Red signals sent by the Remote Control
when a key is pressed.
3
Standby LED
Blinks when the Cine VERSUM Master has been powered down to
Standby or Economy Standby mode.
4
Main power switch
(see SWITCHING ON/OFF THE CINE VERSUM SYSTEM, page 15)
5
LCD Display
This display indicates the status of the Cine VERSUM Master and allows
you to navigate through the different menus.
6
Selection and Confirmation dial
The knob allows to navigate through the different menus.
Table 3-1
3.2 Cine VERSUM 80
Top View
The top side of the Cine VERSUM 80 is provided with the following controls:
R5976490 CINE VERSUM SYSTEM 17012003
7