Brother FAX 870MC - Manual (Page 83)

73
R E M O T E F A X O P T I O N S ( F O R F A X 7 7 0 O N L Y )
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location, using Fax Forwarding, Paging, or Remote Retrieval functions.
The screen will indicate when you have a fax stored in memory.
1 Press Function , 8 , 2 . The screen prompts you to choose a fax setting.
FAX STORAGE:OFF?
SELECT & SET
2 Press or to select ON (or OFF).
3 Press Set when the screen displays your selection.
4 Press Stop to exit.
If there are faxes in memory when you turn the Fax Storage OFF, the screens
prompts you to erase any faxes in memory.
ERASE ALL FAX?
1.YES 2.NO
If you press 1 , all fax data is erased and Fax Storage is turned off. If you press
2 , data is not erased, and Fax Storage remains on.
Changing Remote Access Code
Enter your Remote Access Code when the FAX picks up your call, so you
can access features remotely. The access code is preset to 1 5 9 , but you can
change this.
1 Press Function , 8 , 3 .
2 Enter a three-digit number from 000 to 999. The “ ” cannot be changed.
Do not use the same digits that appear in your Fax Receive or Telephone
Answer Code.
3 Press Set .
4 Press Stop to exit.
See Printing a
Fax in Memory
(Only for FAX 770)
p. 40
See Operation
from Extension
Telephone
p. 39