Brother FAX 870MC - Manual (Page 40)

30
C H A P T E R F O U R
NOTICE
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages clearly
contain, in a margin at the top or bottom of each transmitted page, or
on the first page of the transmission, the date and time it is sent and
an identification of the business or other entity or other individual
sending the message and the telephone number of the sending
machines or such business, other entity or individual.
In order to program this information into your FAX/MFC, complete
the steps described on pages 27–28.
■ The telephone number you enter is used only for Call Back Message and
Cover Page features.
■ If you do not enter a fax number, no additional information can be entered.
■ To enter a space, press once between numbers and twice between
characters.
■ If your Station ID has already been programmed, the screen prompts “1” to
make a change, or “2” to exit without changing.
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When
the beeper is set to LOW or HIGH, the FAX/MFC beeps every time you press a
key or make an error, and at the end of fax sending or receiving.
1 Press Function , 1 , 4 .
2 Press or to select your setting.
3 When the screen displays the setting you want, press Set .
4 Press Stop to exit.