Barco CORONIS FUSION 4MP/6MP - Manual (Page 38)

38 Coronis Fusion 4MP/6MP
Information menu
Exclude I Guard zone When switched on, the video resolution of
the preferred input is set to a value with a
reduced number of lines. The image will be
displayed below the I-Guard patch.
Scaling When switched on, the display will enlarge
(scale up) low resolution video signals if
possible.
The DPMS system will power down the display when the
connected computer is left idle for a certain time.
Barco recommends to switch DPMS on to prevent image burn-
in (image retention) on the LCD panel..
Product The display type
Serial No Indicates the display serial number
SW Number The order no. of the internal software
SW Version Displays the current internal software
version
Display Runtime Indicates the total time the display has
been operating, including the time in
stand-by
Backlight Runtime Indicates the total time the display has
been operating, excluding the time in
stand-by