Barco CORONIS FUSION 4MP/6MP - Manual (Page 24)

24 Coronis Fusion 4MP/6MP
Stand-by switching
U
SING THE TOUCH KEYS
:
1 While the OSD is not on the screen, touch any touch key. As a
result, the control panel illumination is switched on for a few
seconds.
2 While the contol panel illumination is on, touch the stand-by
touch key. A message appears on the screen.
3 Touch the stand-by touch key once more to confirm.
4 To switch the display on while it is in stand-by, touch any touch
key. Next, while the contol panel illumination is on, touch the
stand-by touch key.
U
SING THE CONTROL WHEEL
:
1 While the OSD is not on the screen, click the control wheel shortly.
A message appears on the screen.
2 Click the control wheel once more to confirm.
3 To switch the display on while it is in stand-by, click the control
wheel shortly.
Bringing up the OSD menu
U
SING THE TOUCH KEYS
:
1 While the OSD is not on the screen, touch any touch key. As a
result, the control panel illumination is switched on for a few
seconds.
2 While the contol panel illumination is on, touch the Enter touch
key.
U
SING THE CONTROL WHEEL
:
While the OSD is not on the screen, rotate the control wheel.