Barco CORONIS FUSION 4MP/6MP - Manual (Page 27)

Coronis Fusion 4MP/6MP 27
Advanced operation
Info messages
The following messages may appear automatically on the screen:
I
NPUT
S
ELECTION
The Input selection menu appears in case 2 video signals are connected
and the resolution of one or both video signals is too high to display
them both.
In that case the input selection menu allows you to select one of both
video signals.
N
O SIGNAL SELECTED
This message appears in case the display finds no proper video signal at
its inputs.
R
ESOLUTION TOO HIGH
This message appears in case the resolution of the selected video signal
is too high to display.
T
EXT MODE
/ D
IAGNOSTIC MODE
These messages appear for a few seconds directly after switching to Text
mode or Diagnostic mode.
In text mode, the display luminance is approximately half of the
luminance in diagnostic mode. Text mode is intended for using the
display with office applications such as word processing. You can switch
between both modes by touching the up and down keys at the
same time.