Optional accessories, Before using the appliance for the first time, Setting the clock – Neff B45E52N3GB User Manual
Page 8: Note, Set the current time using the rotary selector, Cleaning the appliance, Operating the appliance, Switching on the appliance, Rst time setting the clock, Ating the appliance

8
Optional accessories
You can purchase optional accessories from the after-sales
service or specialist retailers. You will find a comprehensive
range of products for your appliance in our brochures and on
our website.
Before using the appliance for the first time
In this section, you can read about
■
How to set the clock after connecting up your appliance
■
How to clean your appliance before using it for the first time
Setting the clock
Note: When you press the
KJ
clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹
:
‹‹
flashes in the clock display.
1.
Briefly press the
KJ
clock function button to go to the
setting mode.
The
KJ
and
3
symbols light up.
‚ƒ
:
‹‹
appears in the
clock display.
2.
Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
KJ
clock function
button repeatedly until the
KJ
and
3
symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1.
Remove the accessories from the cooking compartment.
2.
Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3.
Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4.
Heat with
%
Top/bottom heat at 240 °C for 60 minutes.
5.
Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6.
Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1.
Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2.
Turn the temperature selector to change the default
temperature.
Optional accessories
Order no.
System steamer
N8642X3
Grill set
Z1240X2
Glass pan
Z1262X0
Extra-deep pan, enamelled
Z1272X0
Baking tray, non-stick
Z1343X0
Roasting tray, enamelled, two-piece
Z1512X0
CLOU® 1x telescopic shelf
Z1701X2
CLOU® 3x telescopic shelf
Z1742X2
CLOU® 4x telescopic shelf with full exten-
sion
Z1755X2
Optional accessories
Order no.