beautypg.com

Tips and tricks, Roasting and braising, Roasting – Neff B46E74N3GB User Manual

Page 16: Roasting in the universal pan

background image

16

Tips and tricks

Roasting and braising

In this section, you will find information on

Roasting

Braising

Tables for roasting and braising

Tips and tricks

:

There is a risk of injury if you use roasting dishes that

are not heat-resistant!
Only use roasting dishes that are marked as being suitable for
use in the oven.
Do not use shelf height 2 when roasting with

3

CircoTherm®.

The air circulation would be impaired and this will have a

negative effect on your roast.

Roasting

Roasting dish without a lid is used for roasting.
While the meat is roasting, the liquid in the roasting dish will

evaporate. If necessary, carefully add more hot liquid.
When you are roasting using

%

Top/bottom heat, turn the roast

approximately half to two thirds of the way through the roasting

time.

Roasting in the universal pan
Juices escape from the roasting meat and are collected in the

universal pan. You can use these juices as the basis for a tasty

gravy.
Deglaze the pan of the juices with hot water, stock, wine or

similar. Bring to the boil, thicken with cornflour, season and

pass through a sieve if necessary.
You can also cook side dishes (e.g. vegetables) at the same

time as roasting meat in the universal pan.
For smaller joints, you can use a smaller roasting dish instead

of the universal pan. Place this directly on the wire rack.

The cake is too light in colour

Check the shelf height.
Check whether you have used the bakeware that we have recommended.
Place your tin on the wire rack and not on the baking tray.
If the shelf height and the bakeware are correct, then you should either extend the bak-

ing time or increase the temperature.

The cake is too dark

Check the shelf height.
If the shelf height is correct, you should either shorten the baking time or reduce the

temperature.

The cake is unevenly browned in the bak-

ing tin

Check the shelf height.
Check the temperature.
Make sure that your baking tin is not placed directly in front of the air outlets in the rear

panel of the cooking compartment.
Check that the baking tin is in the correct position on the wire rack.

The cake is too dry

Set a slightly higher temperature and a slightly shorter baking time.

The cake is too moist in the centre

Set a slightly lower temperature.
Note: Higher temperatures may not mean shorter baking times (cooked on the outside,

but not on the inside).
Select a longer baking time and allow the cake mixture to prove for longer.
Add less liquid to the mixture.

The cake collapses when you take it out of

the oven

Use less liquid for the mixture.
Set a longer baking time or a slightly lower temperature.

The specified baking time is not correct

For small items, check the quantity on the baking tray. Small items must not be touch-

ing each other.

Frozen products are not browned evenly

after baking

Check whether the frozen product is unevenly pre-browned before baking. This uneven

browning will remain after the baking time.

Several cakes on one level are unevenly

browned

Check the position of the baking tins on the wire rack.

Frozen products are not browned, not

crispy or the specified times are not cor-

rect

Remove ice from frozen products before baking. Do not use frozen products that are

heavily frosted

Saving energy

Only preheat the appliance when it is specified in the baking table that you should do

so.
Use dark baking tins as these absorb the heat better.
Make use of the residual heat with longer baking times and switch the oven off

5 ­ 10 minutes before the end of the baking time.