Neff T18B42N2 - Manual (Page 26)

26
■
Use the residual heat of the hob. For longer cooking times,
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The control panel
Notes
■
When you touch a symbol, the respective function is
activated.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors. The
electronics could overheat.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
• appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to œ . The display remains lit until the hotplate has
cooled sufficiently.
Displays
‚ - Š Heat settings
• / œ Residual heat
‰‰ Timer
Controls
# Main switch
‚ Childproof lock
$ Hotplate selection
A @ Adjustment fields
ó Automatic zone control
3 Timer
Controls
Hotplate Connecting and disconnecting
$ Single-circuit hotplate
ð Dual-circuit hotplate Select the hotplate and touch the ó symbol
î Extended cooking zone Select the hotplate and touch the ó symbol
When the hotplate is connected: the corresponding indicator lights up. On appliances with multiple zone connection, the display
only lights up when the hotplate has been selected.
When the hotplate is switched on: the last selected size is automatically selected again