Sharp LC-60UD20KN - Manual (Page 38)

36
Audio settings
Go to “TV Menu” > “Setup” > “Audio”.
Setup
Bass
Adaptive volume
Audio
Treble
[Off]
STANDARD
CH list
:Back :Enter
Menu
Balance
L30 R30
Audio
Adaptive volume
Adjust volume level automatically to lessen sudden
volume change.
Item
On Adjust the volume gaps.
Off Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference
with the following settings.
Item c (Cursor) d (Cursor)
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance
Decrease audio
from the right
speaker Decrease audio
from the left
speaker
Audio
Surround
This function produces a surround effect from the
speakers.
Item
3D Stadium
Reproduces a life-like experience for
events such as live sports or concert
performances that take place in a stadium
like setting.
3D Hall
Reproduces a concert hall experience with
realistic live surround sound based on
reverberant sounds measured in a concert
hall.
3D Movie
Reproduces a movie theatre experience
with realistic live surround sound based on
reverberant sounds measured in a movie
theatre.
3D
Standard Creates three-dimensional surround sound
with detailed control of the signal phase.
Normal Provides limited surround sound.
Off Outputs normal sound.
Audio
Harmonics enhancer extended
This function improves the sound quality by extending
the selected range.
All Range: The low range will be extended and the
sounds in the medium and high ranges, which have
been lost due to the data being compressed, will
be restored. This setting is effective when playing
back audio through a wireless interface such as
when using Bluetooth playback.
Low Range: The low range will be extended.
Off: No adjustment.
Audio
Clear voice
This function emphasises speech against background
noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio
description if the TV receives a signal including audio
description.
NOTE
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio
when you select a broadcast compatible with audio
description.
• If you do not clearly hear the sound for the visually
impaired, go to “TV Menu” > “Setup” > “Audio” > “Audio
description setting” > “Mix level”, and select the upper
level to turn up the volume.
• This function is available only for DTV broadcasts. This
“Audio description setting” menu is not displayed for the
ATV or the external inputs.
• The audio description sound is superimposed on the
main audio only when the sound is output on the speaker
sound output, headphone sound output and sound for
audio out output. The sound is not output on the S/PDIF
sound output and the SCART sound output.
• This function is not available for the AQUOS Audio
speaker system.
• This function does not work during USB-recording
playback.
Basic adjustment