Sharp LC-60UD20KN - Manual (Page 36)

34
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off
The brightness is fixed at the value set in
“Backlight”.
On Automatically adjusts.
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness.
Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Picture
Picture adjustments
Adjusts the picture to your preference with the
following picture settings.
Adjustment items
Selectable
items
c (Cursor) d (Cursor)
Backlight The screen dims
The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Colour
For less colour
intensity For more colour
intensity
Tint
Skin tones become
purplish Skin tones become
greenish
Sharpness For less sharpness For more sharpness
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “TV Menu” > “Setup” > “Picture” >
“Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour
using a six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation
of a selected colour using a six-colour adjustment
system.
C.M.S.-value
This function adjusts the brightness of a selected
colour using a six-colour adjustment system.
Resolution
This function adjusts the finess of images for each
portion.
Item
Detail
Enhance the resolution feeling of
finest portion
Narrow edge
Enhance the resolution feeling of fine
portion
Wide edge
Enhance the resolution feeling of
smooth portion
Local contrast control
This function adjust a sense of contrast that enables
images sharper (“High”, “Middle”, “Low”, “Off”).
NOTE
• This menu is not available in case of 4K signal.
Colour temp.
Adjusts the colour temperature to give the best
white image.
Item
High White with bluish tone.
Mid-High
Intermediate tone between “High”
and “Middle”.
Middle Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
Low White with reddish tone.
10 point setting*
Finely adjusts each colour
temperature between 1 to 10 points.
R/G/B Gain (LO),
R/G/B Gain (HI) Adjusts the white balance by
changing the value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE
(3D)” from the “AV mode” menu.
Motion enhancement
“Active motion 800” technologies provide superior
solutions for digital display picture quality removing
motion blur. Select “Motion enhancement” setting
(“Active motion 800”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Basic adjustment