Sharp MX-C300W - Manual (Page 7)

5
VERIFYING SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
Before installing the software described in this manual, make sure that your computer satisfies the following
requirements.
*1 The Windows OS Starter Edition and Embedded Edition are not supported.
Other editions and service packs are supported, however, it is recommended that service packs be updated to the
newest available version.
*2 In addition to the models described on the right, some models equipped with the wireless LAN function are also
supported.
*3 Including the 64-bit edition OS.
*4 The machine's USB 2.0 port will transfer data at the speed specified by the USB2.0 (Hi-Speed) standard only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows that Microsoft provides
through "Windows Update" is installed.
Depending on the models, the software may not be available for Windows 2000.
*5 Compatible with models preinstalled with Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008,
Windows 7, Windows 8, or Windows Server 2012, and which are equipped standard with a USB interface.
*6 Cannot be used when the machine is connected with a USB cable. The PC-Fax driver and scanner driver cannot be
used.
Windows Macintosh* 6
Operating system* 1 Windows XP* 3 , Windows Server 2003* 3 ,
Windows Vista* 3 , Windows Server 2008* 3 ,
Windows 7* 3 , Windows 8* 3 , Windows Server 2012* 3
Mac OS X v10.4,
Mac OS X v10.5,
Mac OS X v10.6,
Mac OS X v10.7,
Mac OS X v10.8
Computer type* 2 IBM PC/AT compatible computer
Equipped LAN board or equipped standard with a USB
2.0
*4 /1.1 *5 port.
An environment in which any
of the operating systems
listed above can fully operate
(including Macintosh
computers with an Intel
processor).
Display 1024 x 768 dots resolution and 16-bit color or higher is
recommended.
Other hardware
requirements An environment that allows any of the above operating
systems to fully operate.
For users of Windows
To perform the procedures described in this manual such as installing the software and configuring settings after installation,
administrator authority is required.