Sharp MX-C300W - Manual (Page 29)

27
INSTALLING THE PRINTER STATUS
MONITOR
Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their
computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error
information such as paper misfeeds, printer configuration information as an image, the paper sizes that can be used,
and the amount of paper remaining.
Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR
ALL SOFTWARE)" (page 8), perform the steps below.
1 Click the [Utility Software] button and
then click the [Printer Status Monitor]
button.
2 Follow the on-screen instructions.
3 When the installation completed screen
appears, click the [Finish] button.
To have the Printer Status Monitor start automatically
when your computer is started, select the [Add this
program to your Startup folder] checkbox
and click
the [Finish] button.
4 Click the [Close] button in the window
of step 1.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file:
Click the Windows [start] button, select [All Programs], select [SHARP Printer Status Monitor] and then select [Help].
In Windows 8/Server 2012, right-click in the startup window (or swipe upward from the bottom edge), then select
[Taskbar]
→ [All Applications] → [Help] in the SHARP Printer Status Monitor menu.
The Printer Status Monitor cannot be used in the following situations:
• When the machine is connected by a USB cable.
• When printing to the machine using the IPP function. (Depending on the models, this function may not be available.)
After the installation, a message prompting you to
restart your computer may appear. If this message
appears, click the [Yes] button to restart your
computer.