Belkin F5D7632EA4A - Manual (Page 32)

30 30
Manually Configuring your Router
4. Click “Apply Changes” to finish. You must now set all clients to match these
settings.
Setting WPA/WPA2 (with radius server) Settings
If your network uses a radius server to distribute keys to the clients, use this
setting.
1. From the “Allowed Client Type” drop-down menu, select “WPA/WPA2”.
2. For “Encryption Technique”, select “802.1x” for environments with RADIUS
servers. This setting will have to be identical on the clients that you set up.
3. Enter the session idle time-out of the radius server into the “Session Idle
Timeout” field.
4. Enter the key interval—how often the keys are distributed (in packets)—in the
“Re-Authentication Period” field.
5. Enter the waiting time after authentication failed in the “Quiet Period” field.
6. Enter the IP address and port number of the radius server into the “Server-IP”
and “Server-Port” fields.
7. Enter the radius key into the “Secret Key” field.
8. Click “Apply Changes” to finish. You must now set all clients to match these
settings.