Sharp XE-A113 - Manual (Page 60)

58
Rounding amount printing (A)
Total amount rounding when a transaction is finalized directly by
X , Y , c or b key(B)
Rounding up of the unit digit of amount (C)
Rounding down of the unit digit of amount (D)
• Handle C and D as a pair. When you live in Switzerland or Norway, set as shown on the table below for the
parameters C and D.
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
Value of D < or = Unit digit of amount — rounding to 5
In other cases: Unit digit of amount < or = Value of D — rounding down
Value of D < Unit digit of amount < Value of C — rounding to 5
Value of C < or = Unit digit of amount — rounding up
Application of rounding (E)
Limit of the least significant digit in entering amount of item (F)
Memory of difference due to rounding (G)
Limit of the least significant digit in entering amount of payment (H)
• When you live in Switzerland or Norway, set as shown on the table below for the parameters E through H.
CD E F G H
Switzerland 82 Item & payment 0 and 5 only No 0 and 5 only
Norway 54 Payment Arbitrary Yes 0 only
Job code: 68
* Item: Selection: Entry:
A Always enter 0. 0
B Always enter 0. 0
C Temporary EJ printing during a transaction Disable 0
Enable* 1
D EJ printing and clearing EJ data when No* 0
issuing general Z1 report Yes 1
E PGM mode operation records type Details* 0
Header information only 1
F REG/MGR/VOID modes operation Details* 0
records type Total 1
G Compressing printing for EJ data No (normal size) 0
Yes (small size)* 1
H Action when EJ memory area is full Continue 0
Continue and warning (near full warning)* 1
Lock and warning (with near full warning) 2
A113_3 FOR THE MANAGER 06.9.11 6:39 PM Page 58