Bosch WFR 2450 - Manual (Page 19)

19
Program finished at
q Turn the program selector to the desired proĆ
gram.
q Load the laundry and close the loading door.
The Start/Pause indicator light flashes (red).
q Select an additional option.
Example:
q Press the Menu button until, Program finished
at" is displayed.
Current end time flashes.
The Start/Pause indicator light flashes (red).
i The menu is being left if a button is not pressed
within 10 seconds.
q Press the Select button until the program end
time is displayed.
The program end can be set in 30 minute
steps.
The time can be programmed up to a maxiĆ
mum 24 hours in advance.
i
The end time must be reset if the program,
additional options or the current time is
changed.
i If there is a small load of lightly soiled washing,
the program may end well before the selected
end time.
If there is a large load of heavily soiled washing,
the program may end several minutes after the
selected end time.
You can change other settings
or
q Press the Start/Pause button.
The delayed Start is activated.
The indicator light shines.
Time delay" is indicated in the display field.
i To save energy, all displays are switched off
30 seconds after the buttons were last
pressed. If the Select button is pressed, the
displays are switched on again.