beautypg.com

Programs and functions, Basic programs, Extra cycle program selector – Bosch WFR 2450 User Manual

Page 13

background image

13

Programs

and Functions

Select the desired program - see also the separate

program overview.
Cycle time can vary depending on cycle selected,

temperature and pressure of incoming water, water

hardness, size of load, type of fabrics and distance

of unit from the drain. Temperature of water and

wash load will alter water consumption and cycle

duration.
The maximum spin speeds of the programs are deĆ

pendent on the model. For adjusting the spin

speed, see Page 18.

Basic programs

Regular/Cotton

Regular/Cotton settings are intended to be used

for colorfast sturdy, hard wearing items made from

cotton or linen, such as:
- Play clothes

- Work clothes

- Sheets

- Towels

- Jeans

- TĆshirt, etc.
Refer to the care label of the clothing for settings

to use.
Permanent Press

Permanent Press settings are intended to be

used with permanent press items and items made

from cotton, linen, synthetic or blended fabrics and

outer garments, such as:
- Dress shirts

- Dress pants

- Poly/cotton blend clothing

- Clothes requiring a special tumble sequence

and spin speed to minimize wrinkling.

Delicates

Delicates settings are intended for use with

delicate easy care items made from cotton, satin,

synthetic or blended fabrics and curtains.
No spinning between rinse cycles.

We do not recommend washing these fabrics with

other rougher fabrics.
Hand Washables

Hand Washables settings are intended for very

delicate easy care items that usually require hand

washing.
These cycles have been specifically designed to

provide extremly gentle treatment of fabrics.

All wool, silk or other items marked with the "Hand

Wash" symbol, (

6

), on the care label can be safely

washed with this cycle.
Temperature Settings

Following wash temperatures are available:
Power temp. boost - 160

°

F (71

°

C)

This is the highest temperature setting. The water

temperature is raised to approximately 160

°

F

(71

°

C).

Temp. boost - recommended for 145

°

F (63

°

C)

hot - 125

°

F (52

°

C)

warm - 95

°

F (35

°

C)

cold - 60

°

F (15

°

C)

Extra cycle program selector

Spin

Spin cycle for spinning handĆwashed laundry.

Water is drained before the spin cycle.

Soak

An intergrated soak cycle for preĆtreating of heavily

stained items. The soak cycle lasts 2 hours. The

reached temperature is 95

°

F (32

°

C). It is ending

with a short spin cycle. All the water is pumped out.
Drain

Water is drained after a program with the No final

spin setting for gentle treatment of delicate

laundry.

This manual is related to the following products: