Troubleshooting the 10/100 ps – Brady BBP81 User Manual
Page 82
Hardware Troubleshooting
Troubleshooting the 10/100 PS
82
Y885775
BradyConnect 10/100 Internal Print Server User Guide
07/18/2008
Troubleshooting the 10/100 PS
Defaulting the 10/100 PS on the BBP81 (4”) and BBP81 (6”) Printers
To default the 10/100 Internal PS to factory settings using the control panel,
complete these steps:
1.
From the control panel, press
Setup/Exit
two times
.
2.
Press
Plus (+ key)
five times.
The control panel will read DEFAULT NET.
3.
Press
Setup/Exit
to save the change.
4.
After the printer defaults all settings, the control panel will show PRINTER READY.
Note •
Only the BBP81 (4”) and BBP81 (6”) printers have a control panel.