Brady BBP81 User Manual
Page 71
71
BradyConnect WebView
Alert Setup
07/18/2008
BradyConnect 10/100 Internal Print Server User Guide
Y885775
9.
Enter a valid email address to send the alert messages to.
10.
Click
Add Alert Message
.
To receive email alert, you must give 10/100 Internal PS the IP address of your mail server
that is running SMTP.
11.
To save current settings, click
Save Printer Setting
.
12.
Enter the password and click
Save Current Configuration
.
.
13.
You can continue to add more Alerts, if finished:
•
From the Printer Home Page, select
PrintServer Settings > Network Communications
Setup
.
•
Click
SMTP Email Alerts
.
•
Specify your SMTP server address.
When these steps are done, you can begin receiving email notification messages.
Example •
(The Port field can be ignored for
email setup.)
Important •
A password is required. If you forget to enter the password, the alerts you just
set are deleted.
Important •
The printer accepts only the last configuration made.
Note •
The SMTP Server address might be referred to as Mail Server address.