Before you begin – Brady BBP81 User Manual
Page 34
Getting Started
Before You Begin
34
Y885775
BradyConnect 10/100 Internal Print Server User Guide
07/18/2008
Before You Begin
10/100 Internal PS offers many features, but how you access and work with them is dependent
on your environment. Before you begin, you need to get information from the 10/100 Internal
PS configuration label.
Table 5
shows the minimum label widths needed to print a 10/100 Internal PS configuration
label with different DPI printheads.
To print a network configuration label for BBP81 (4”) and BBP81 (6”) printers
with a 10/100 Internal PS, complete these steps:
1.
Turn on (
I
)
the printer and let it complete its power-up cycle.
2.
When the POST cycle is complete, press
Setup/Exit
to enter the Setup Mode.
3.
Scroll through the parameters using the
Plus (
+ key) until you reach List Network.
4.
Press Select to access List Network. Print+ displays.
5.
Press
Plus (
+ key) to print the network configuration label.
Important •
Make sure the printer is turned off (
O
).
Table 5 • Label Width
DPI
Inches
MM
300
2.50
63.50