Defaulting the 10/100 internal ps – Brady BBP81 User Manual
Page 38
Getting Started
Defaulting the 10/100 Internal PS
38
Y885775
BradyConnect 10/100 Internal Print Server User Guide
07/18/2008
Defaulting the 10/100 Internal PS
This section provides you with instructions for defaulting the 10/100 Internal PS to factory
settings using the control panel and WebView.
Defaulting the 10/100 PS on the BBP81 (4”) and BBP81 (6”) Printers
To default the 10/100 Internal PS to factory settings using the control panel on
the BBP81 (4’) or BBP81 (6”) printers, complete these steps:
1.
From the control panel, press
Setup/Exit
two times
.
2.
Press
Plus (+ key)
five times.
The control panel will read DEFAULT NET.
3.
Press
Setup/Exit
to save the change.
4.
After the printer defaults all settings, the control panel will show PRINTER READY.