Brady BBP81 - Manual (Page 36)

Getting Started
Before You Begin 36
Y885775 BradyConnect 10/100 Internal Print Server User Guide 07/18/2008
6. Press Setup/Exit to exit the Setup Mode.
7. From the network configuration label, you need to look for these numbers:
• IP PROTOCOL
• IP ADDRESS
• SUBNET MASK
• DEFAULT GATEWAY
• MAC ADDRESS
8. On the network configuration label that prints out for your 10/100 Internal PS device,
circle the aforementioned settings. You can now proceed to
Assigning an IP Address
on page 40 .