Bosch MUM6N10UC - Manual (Page 11)

11
All models of the Bosch Universal
Kitchen Machines incorporate
a builtĆin safety cutout switch to proĆ
tect the motor against overheating.
If the safety becomes activated, the
power unit will stop. If the power unit
should stop even though there is
power to the unit see TROUBLEĆ
SHOOTING at the back of this manual.
6. Turn power unit off.
When your work with the attachment is
completed, turn the power unit to the
Off position, O/Off," and unplug.
7. Remove the attachment.
Remove the attachment from the
power unit. See instructions for the
specific attachment being used.
8. Continue use.
On certain attachments, the container
will need to be periodically emptied
when working with large quantities.
9. Place contents (batchĆfeed type).
If the attachment is the batch feed
type, disassemble per the specific
attachment's instructions and place
the contents in a suitable container.
10.Care and Cleaning
Once you have completed working
with the Bosch Kitchen Machine, the
next step is to disassemble and clean
the attachments. Refer to care and
cleaning section for specific
instructions.
If you wish to use another attachment,
please return to step 4, above.
Power unit
With the power unit turned Off and
unplugged, it should be cleaned only
with a clean, damp cloth. Then wipe
off the motor drive cover and reinstall
on the power unit. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power
unit in water.
The power unit may be left on the
counter or stored for future use. If the
unit will be stored, lift the power unit
and place in your chosen storage area.
Attachments
The attachment(s) that have been
used should be disassembled and
washed, per their specific instructions,
dried and stored for future use.