Bosch MUM6N10UC - Manual (Page 10)

10
GETTING STARTED
The operation of your Bosch Universal
Kitchen Machine is summarized below.
Specific instructions for each of the
attachments included with your machine
are listed separately. Please read the
specific instructions thoroughly before
using that attachment, paying particular
attention to the IMPORTANT
SAFEGUARDS and WARNINGS provided.
1. Place power unit on suitable work
surface.
Before using the machine with any of
the attachments, the power unit
should be placed on a suitable work
surface. The surface should be sturdy,
smooth and clean; make sure that
there is no flour or oil on the surface. A
clean, smooth surface will provide the
best footing for the suction cup feet on
the power unit and will limit slipping
and/or walking".
2. Plug power unit into power supply.
Unwind the power unit's cord to
appropriate length and plug it into
a convenient nearby receptacle.
3. Remove motor drive cover.
If necessary, remove motor drive cover
from drive that will be used and place
it on drive that will not be used.
The cover, when placed on the
highĆspeed drive, can be locked in
position by pressing down, see
figure 2c.
4. Select attachment to be used.
Select the attachment you wish to use
and place on power unit. See specific
instructions for attachment selected
on pages listed below:
Attachment Pages
Mixing bowl w/dough hook 13
Mixing bowl w/twin whisks 14
Blender 19
5. Operate unit with rotary switch.
Once the attachment is in place, the
speed of its moving components can
be controlled through the use of the
rotary switch at the front of the power
unit. See figure 2a. The rotary switch
has five positions:
a. M," a momentary pulse" position
that provides full speed and power
for the time it is held in position.
b. O/Off," the off position.
c. Four speeds labeled 1, 2, 3 and 4.
Speed 1 is the lowest speed. The
speed increases with each
succeeding step up to the highest
speed, speed 4.