Nokia 6310i - Manual (Page 81)

10
[ 72 ]
10) Infrared
Caution: Do not point the infrared (IR) beam at anyone's eye or allow
it to interfere with other IR devices. This device is a Class 1 Laser product.
Note: Your phone must be switched on to use this function. Do
not switch on the phone when wireless phone use is prohibited or
when it may cause interference or danger.
You can set up the phone to receive data
through its IR port. To use an IR connection,
the device with which you want to establish a
connection must be IrDA compliant. You can
send or receive data such as business cards
and calendar notes to or from a compatible
phone or data device (for example, a
computer) via the IR port of your phone.
• SENDING AND RECEIVING DATA VIA INFRARED
Ensure that the IR ports of the sending and receiving devices are pointing
at each other and that there are no obstructions between the devices. The
preferable maximum distance between the two devices in an infrared
connection is approximately three feet.
To activate the IR port of your phone to receive data via IR:
1 Press Menu 10 (Infrared).
2 The user of the sending phone selects the desired IR function to start
data transfer.
If data transfer is not started within two minutes after the activation
of the IR port, the connection is cancelled and must be started again.