Nokia 9300 - Manual (Page 70)

To end the Bluetooth SIM access connection from your smartphone, press Menu, select , press Exit Remote SIM profile , and OK .
Data call and fax call diverting (network service)
Call diverting allows you to direct your incoming data and fax calls to another phone number.
To divert data or fax calls, select
Telephone > Data call forwarding or Fax call forwarding .
Define the following:
•
Forward all calls — When activated, all incoming calls are diverted.
• Forward if busy — When activated, incoming calls are diverted if you are engaged in another call.
• Forward if out of reach — When activated, incoming calls are diverted when the device is switched off or outside the network
service area.
• Forward if not answered — When activated, incoming calls are diverted if you do not answer them within a certain time
period.
• Forward if not available — In a single action, this option activates the following: Forward if busy , Forward if out of reach ,
and Forward if not answered .
To check whether the divert is active, select Telephone > Data call forwarding or Fax call forwarding , select the divert option,
and press Check status .
To cancel all data or fax call diverts, select Telephone > Data call forwarding or Fax call forwarding , and press Cancel all .
Messaging
Go to Desk > Tools > Control panel > Messaging .
See "Editing fax settings," p.35.
See "Multimedia message account settings," p.34.
See "Text message settings," p.32.
Service message
To edit reception and authentication settings for service messages, select Messaging > Service message . In the Reception: field,
select Yes if you want to receive all service messages to your Inbox. Select No to ignore all service messages.
Connections
Go to Desk > Tools > Control panel > Connections .
• Internet setup — See "Internet setup," p.72.
• Bluetooth — See "Bluetooth," p.86.
Cable setup
To specify how the data cable is used, select Connections > Cable setup .
Select from the following options:
•
PC Suite connection — Select this to use the data cable to connect to PC Suite.
• IP passthrough — Select this to connect your device to a compatible PC and use the Internet or network connection of the PC.
• IP passthrough overrides PC Suite — Select this to automatically terminate a PC Suite connection via data cable when you
connect your device to a compatible PC and use the Internet or network connection of the PC.
RealPlayer settings
To access streaming data, such as real-time audio and video, you must set network and proxy settings for the RealPlayer
application.
To modify RealPlayer settings, select
Connections > RealPlayer settings .
On the Network and Proxy pages, define the following:
• Connection timeout — Specify how long RealPlayer waits before reporting a network connection failure. Increase the time
if you frequently receive a time-out error.
• Server timeout — Specify how long RealPlayer waits for a response from the media server before disconnecting.
• Port range: — Specify the port range that is used for receiving data.
• Use proxy: — Select Yes , if your Internet service provider requires that a proxy server is used to connect to the Internet.
• Host address: — Enter the proxy server address.
• Port: — Enter the port number of the proxy server.
C o n t r o l p a n e l
Copyright © 2005 Nokia. All Rights Reserved. 69