Keypad lock (keyguard), Volume control, Memory cards – Nokia 9300 User Manual

Page 15: Instructions in your device, Using the cd-rom

Keypad lock (Keyguard)

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Key in the

emergency number and press .
Use the keypad lock (keyguard) to prevent the keys on the cover phone from being accidentally pressed.
To lock the keypad, press the center of the scroll key and .
To unlock the keypad, press the center of the scroll key and .
To lock the system, press the center of the scroll key and . Note that you have to define a lock code with which you can lock

and unlock the system.
To unlock the system, press the center of the scroll key and . Key in the lock code and press

Volume control

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely

loud.

To adjust the volume level during a call, press the scroll key left or right.
To adjust the volume level when using the loudspeaker, open

Telephone

, and scroll left or right with the joystick.

Memory cards

Note: Before you use a memory card from the Nokia 9210 Communicator sales package with your Nokia 9300, you

must convert the memory card with Data mover and reinstall the applications that you previously installed to the

memory card. However, do not reinstall any pre-installed applications for the Nokia 9210 Communicator. Your Nokia

9300 contains a later version of these applications, and these later versions must be used with the Nokia 9300.

Your Nokia device only supports the FAT16 file system for memory cards. If you use a memory card from another device or if

you want to ensure compatibility of the memory card with your Nokia device, you may need to format the memory card with

your Nokia device. However, note that all data in the memory card is permanently deleted if you format the memory card.
Inserting and removing a memory card
1. Slide the memory card into the memory card slot (2). Make sure that the beveled corner of the memory card is pointing

towards the SIM card slot and the contact area is facing downwards. The back cover must be in place for the device to

recognize the memory card.

Note: Do not remove the MMC card in the middle of an operation when the card is being accessed. Removing the

card in the middle of an operation may damage the memory card as well as the device, and data stored on the card

may be corrupted.

You can remove a memory card after you have removed the back cover even when the battery is inserted.

If you have applications on a memory card, those are shown on

Desk

or in one of the group on Desk, depending on the application.