Nokia 6102 - Manual (Page 49)

M e d i a
48 Copyright © 2005 Nokia
Save radio channels
1. To start the channel search, select and hold or . To change the radio
frequency in 0.05 MHz steps, briefly press or .
2. To save the channel to a memory location, 1 to 9, press and hold the
corresponding number key. To save the channel in the memory location from
10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.
3. Enter the name of the channel, and select OK .
Listen to the radio
Select Menu > Media > Radio . To scroll to the desired channel, select or ,
or press the headset key. To select a radio channel location, briefly press the
corresponding number keys.
Select Options and from the following options:
Turn off — to turn off the radio
Save channel — to save a new channel, and enter the channels name
Channels — to select the list of saved channels. To delete or rename a channel,
scroll to the desired channel, and select Options > Delete channel or Rename .
Mono output or Stereo output — to listen to the radio in monophonic sound
or in stereo
Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset.
Keep the headset connected to the phone. The lead of the headset functions as
the radio antenna.
Set frequency — to enter the frequency of the desired radio channel
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Recorder
You can record pieces of speech, sound, or an active call for 5 minutes.
The recorder cannot be used when a data call or packet data connection is active.