Nokia 6102 - Manual (Page 44)

S e t t i n g s
Nokia 6101 and Nokia 6102 User Guide 43 Copyright © 2005 Nokia
You can also set the dial-up service settings (access point name) on your PC using
the Nokia Modem Options software. See “PC Suite,” p. 65. If you have set the
settings both on the PC and on your phone, the PC settings are used.
■ Enhancements
This menu is shown only if the phone is or has been connected to a compatible
mobile enhancement.
Select Menu > Settings > Enhancements . You can select an enhancement menu
if the corresponding enhancement is, or has been, connected to the phone.
Depending on the enhancement, select from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically after
5 seconds. If Incoming call alert is set to Beep once or Off , automatic answer is off.
Lights — to set the lights permanently On . Select Automatic to set the lights on
for 15 seconds after a key press
TTY/TDD > Use TTY > Yes — to use the TTY settings instead of headset or
loopset settings
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. The services are browser, multimedia messaging, and remote
Internet server synchronization. Get the settings from your SIM card, from a service
provider as a configuration message, or enter your personal settings manually.
You can store configuration settings from up to 20 service providers in the phone
and manage them within this menu.
To save the configuration settings received by a configuration message from a
service provider, see “Configuration settings service,” p. 12.
Select Menu > Settings > Configuration and from the following options:
Default configuration settings — to view the service providers saved in the phone.
Scroll to a service provider, and select Details to view the applications that the
configuration settings of this service provider support. To set the configuration
settings of the service provider as default settings, select
Options > Set as default .
To delete configuration settings, select Delete .
Activate default in all applications — to activate the default configuration settings
for supported applications
Preferred access point — to view the saved access points. Scroll to an access point,
and select Options > Details to view the name of the service provider, data bearer,
and packet data access point or GSM dial-up number.