Nokia 3155i - Manual (Page 61)

S e t t i n g s
60
3. If necessary, select an option associated with that function.
4. Select Start , and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag. appears next to commands
with voice tags assigned.
Activate a voice command
After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now displayed, pronounce the voice tag clearly into the microphone.
With the voice tag found, the device displays Found: , and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Playback —Listen to the voice command tag.
Change —Change the voice command.
Delete —Erase the voice command tag.
■ Enhancement settings
The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. In the standby mode, select
Menu > Settings >
Enhance-ments > Headset , TTY/TDD , or Charger .
Headset
Important: The headset may affect your ability to hear sounds around
you. Do not use the headset in situations that may endanger your safety.
Select the option of your choice to enter the submenu and modify its settings.
Default profile —Choose the profile you want automatically activated with a
headset connected.
Automatic answer —Answer calls automatically after one ring with a headset
connected. Select On or Off .