Nokia 3155i - Manual (Page 57)

S e t t i n g s
56
Save information
1. In the standby mode, select Menu > Settings > Call > Calling card .
2. Enter your lock code, and select OK . See "Change lock code," p. 62.
3. Scroll to one of the four card memory locations, and select Options > Edit >
Dialing sequence and one of the following sequence types:
Access no.+ phone no.+ card no. —Dial the access number, the phone number,
then the card number (and the PIN, if required).
Access no.+ card no.+ phone no. —Dial the access number, the card number
(and the PIN, if required), then the phone number.
Prefix+ phone no.+ card no. —Dial the prefix (numbers that must precede the
phone number) and phone number you want to dial, then the card number
(and the PIN, if required).
4. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
5. Select Card name , enter the card name, and select OK .
Make calls
After you have saved your calling card information in your device, you can make a
call using your calling card.
1. In the standby mode, select Menu > Settings > Call > Calling card .
2. Enter your lock code, and select OK . See "Change lock code," p. 62.
3. Select your desired calling card.
4. Press the end key to return to the standby mode; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call. See your calling card for
instructions
5. Press and hold the call key for a few seconds until Card call appears.
6. When you hear the tone or system message, select OK .
Abbreviated dialing
Abbreviated dialing creates 4-5 digit numbers for your contacts.
In the standby mode, select Menu > Settings > Call > Abbreviated dialing > On or Off .
International prefix
You can store an international dialing prefix into your device. In the standby
mode, select
Menu > Settings > Call > International prefix .