Toshiba ML933 - Manual (Page 54)

54
CONTROLS AND FEATURES
En
glis
h
Using Intel® Wireless Display
Intel® Wireless Display (Intel® WiDi) is supported on
this TV. You can use your TV as second display for
PC with Intel® Wireless Display.
NOTE: In order to use this feature, the TOSHIBA Dual Band
WLAN Adaptor WLM-20U2 (not supplied) is required (see
page 14).
a
Press MENU / C c to highlight Function icon.
b
Press B / C c to highlight Intel® Wireless Display
icon and press OK.
A prompt will appear on the screen. Select Yes.
c
Launch the Intel® WiDi software on your PC and select
“scan for available adaptors”.
Intel® WiDi device name and ID list will then be
displayed on the PC screen.
Select the TV which you wish to connect to.
“Connecting” will be shown on the TV.
d
Connecting your PC to your TV the first time:
When selecting the Toshiba TV for the first time, a 4-
digit code will appear on your TV screen. This code
needs to be inputted into your computer to
authenticate the connection.
If authentication has already taken place:
”Connected to Intel® Wireless Display. Please Wait”
will appear on screen.
e
After the Intel® WiDi connection is complete, the TV
screen will mirror the content shown on the PC
screen.
NOTE:
• When connecting Intel® WiDi, PC must have power turned
on.
• When the Intel® WiDi software is active, other TV network
connections are not available.
• When the Intel® WiDi software is active, other applications
may not be usable.
• Intel® WiDi device name of the TV can be changed from the
Intel® WiDi software.
To exit Intel® Wireless Display
Exit Intel® Wireless Display by pushing the disconnect button
on Intel® WiDi software or by pressing EXIT on the TV remote
control.
NOTE: If the PC has been inactive for some time, the Intel®
WiDi connection will be disconnected automatically.
The TV's Intel® Wireless Display device name can be changed.
a
In the Preferences menu, press B or b to select
Setup and press OK.
b
Press B or b to highlight Intel® Wireless Display
Setup and press OK.
c
Highlight the Intel® Wireless Display Name and
press OK.
The Software Keyboard window will appear.
d
Input the Intel® Wireless Display device name by
using the software keyboard (see page 44). Press the
BLUE button.
e
Highlight Done and press OK to save your setting.
PC List displays a list of MAC addresses for previously connected
PC that have been connected before. The maximum number that
can be stored is 20.
If the list run out of space, the least-recently-used MAC
address will be deleted and the new MAC address added
automatically.
a
In the Intel® Wireless Display Setup screen,
highlight the PC List and press OK.
PC List will appear.
The registered PC can be deleted one by one by pressing RED
key in the List.
When doing so the following text can be seen “Do you want
to unregister this PC? Yes/No” (default cursor is “No”).
Intel® Wireless Display Device Name
PC List