Skip, En glis h – Toshiba ML933 User Manual
Page 22
22
SETTING UP YOUR TV
En
glis
h
g
Each signal will show on the television. If it is not your
media recorder, press
B
or
b
again to restart the
search.
h
When your media recorder signal is found, press
c
to
move along to Station. Use
B
,
b
,
C
and
c
to put in
the required characters, e.g. VCR.
i
Press OK to save.
j
Repeat for each position you want to tune.
k
Press EXIT when you have finished.
To prevent certain channels from being viewed, positions can be
skipped.
a
Select ATV Manual Tuning from the System Setup
menu.
b
Use
B
or
b
to highlight the position to be skipped
and press OK to select.
c
Press
c
to select Skip.
d
Use
B
or
b
to turn Skip on.
Press OK.
8
on the screen indicates a skipped position.
e
Press BACK and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by P
U
and P
u
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.
PLEASE NOTE
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
ATV Manual Tuning
Station
I
A
1
C
2
0
C
V
R
Skip
Pos.
Channel
Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
ABC1
ABC1
5
C25
C28
C30
ATV Manual Tuning
Skip: On
I
A
1
C
2
0